Century V6-204 3.3L VIN N FI (1990)
3.
Remove retainer, nut and steering wheel.
4.
Remove column from vehicle.
5.
Remove bearing and seal retainer, lower spring retainer, lower bearing spring and lower bearing seat.
6.
Remove hex head screws, adapter and bearing assembly and shift tube return spring.
7.
Remove column shaft assembly and check for accident damage.
8.
Remove retaining ring, gearshift lever bowl and shroud.
9.
Remove upper shift lever spring from bowl, shift tube assembly and bowl lower bearing.
Assembly
1.
Install lower bowl bearing to jacket assembly and upper shift lever spring to bowl.
2.
Install shift tube assembly, gearshift lever bowl and shroud.
3.
Install shift tube return spring, adapter and bearing assembly, lubricating inner surface with lithium grease.
4.
Install screws and torque to 27 inch lbs.
5.
Install lower bearing seat, lower bearing spring, bearing and seal retainer.
6.
Install steering wheel and torque nut to 30 ft. lbs.
7.
Install retainer, horn lead and pad and connect battery ground cable.
