Century V6-204 3.3L VIN N FI (1990)
Front Door Hardware - Disassembled View
TOOL REQUIRED:
^
J 29022-A Hand Riveter
REMOVE OR DISCONNECT
1. Door trim panel and water deflector.
2. With window in full-up position, tape window to door frame.
3. Lower sash bolts.
4. Punch out center pins of rivets holding regulator to door inner panel.
5. Using 1/4 inch drill bit, drill out rivets.
6. Move regulator and motor assembly rearward and remove electrical connector.
7. With regulator in door, drill out regulator to motor rivets using a 3/16 inch drill bit. Remove motor.