Century V6-260 4.3L DSL (1984)
Trim Panel: All Technical Service Bulletins
Rear Quarter Trim Finishing Panel Fastener - Loose
Bulletin 84-10-6
Date
Dec. '83
Ref. No. 84-079-10
SUBJECT:
LOOSE REAR QUARTER TRIM FINISHING PANEL FASTENER
MODELS AFFECTED: ALL 1984 CENTURY 19 AND 27 STYLES
FIGURE 1
If a loose rear quarter trim finishing panel to fasteners are encountered, the condition may be repaired by installing the fastener to the trim panel using
adhesive backed body side molding foam tape (3M-06380 or equivalent) followed by the installation of cloth-backed waterproof body tape as shown in
Figure 1. The cloth-backed body tape is used to provide adequate retention of fastener to trim panel and prevent peel load on tape.
