Century V6-3.1L VIN J (2005)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Window Belt Inner Sealing Strip Replacement
Sealing Strip Replacement - Rear Door Window Belt Inner
Removal Procedure
1. Lower the rear door window.
2. Remove the rear door trim panel. Refer toTrim Panel Replacement - Side Rear Door See: Rear Door Panel/Service and Repair
3. Lift the rear door window inner belt sealing strip off of the weld flange.
Installation Procedure
Important:
*
Ensure the rear end of the strip is inserted into the gap formed by the weatherstrip and the door inner panel.
*
Ensure the rear end of the strip is flush to the rear leg of the weatherstrip.
*
Ensure the rear end of the strip does not interfere with the path of the window.
1. Install the rear door window inner belt sealing strip to the weld flange, pressing firmly until fully seated.
2. Install the rear door trim panel. Refer toTrim Panel Replacement - Side Rear Door See: Rear Door Panel/Service and Repair
3. Raise the rear door window.
