Century V6-3.1L VIN J (2005)
Grille: Service and Repair
Fascia Grille Replacement (Century)
Removal Procedure
1. Open the hood.
2. Remove the nuts from the outboard locating studs.
3. Remove the grille from the front bumper fascia.
Installation Procedure
1. Align the grille outboard locating studs to the holes in the front bumper fascia.
2. Press into place until properly seated.
Notice: Refer toFastener Notice in Cautions and Notices.
3. Install the grille nuts to the studs.
Tighten the nuts to 5 Nm (44 lb in).
4. Close the hood.
