Century V6-3.1L VIN J (2005)
bolt shank (3, 4). Ensure that there is not a buildup of excess lubricant at the end of the leading caliper pin (1), in front of the bushing.
3. Install the caliper (2) over the rotor and onto the caliper bracket (3).
Important: The leading caliper pin, or top bolt, has a bushing as part of the assembly. The trailing caliper pin, or bottom bolt, is a solid design.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the caliper pin bolts (1). The leading caliper pin bolt, or top bolt, has a bushing as part of the assembly. The trailing caliper pin bolt, or
bottom bolt, is a solid design. Ensure that the bolt boots fit securely in the groove of the caliper pin bolts. If the boots are damaged, they must be
replaced.
^
Tighten the bolts to 95 Nm (70 ft. lbs.).
