Century V6-3.1L VIN J (2005)
Brake Caliper: Service and Repair
Rear
BRAKE CALIPER OVERHAUL - REAR
Removal Procedure
1. Remove the rear brake caliper from the vehicle.
Caution: Do not place fingers in front of the caliper piston(s) in an attempt to catch or protect it when applying compressed air. The
piston(s) can fly out with force and could result in serious bodily injury.
Notice: Use clean cloths to pad interior of caliper housing during piston removal. Use just enough air to ease the pistons out of the bores. If the
pistons are blown out, even with the padding provided, it may be damaged.
2. Remove the brake caliper piston from the caliper bore, by directing low pressure compressed air into the caliper bore through the fluid inlet hole.
3. Remove the retaining ring that secures the dust boot to the caliper housing.
