Century V6-3.1L VIN J (2005)
Important: Install NEW copper brake hose gaskets.
5. Assemble the brake hose bolt (1) and the NEW copper brake hose gaskets (3) to the brake hose (2).
6. Install the brake hose-to-caliper bolt to the brake caliper.
^
Tighten the bolt to 54 Nm (40 ft. lbs.).
7. Remove the 2 wheel lug nuts retaining the rotor to the hub.
8. Install the front tire and the wheel assembly.
9. Lower the vehicle.
10. Fill the master cylinder to the proper level with clean brake fluid.
11. Bleed the brake system.
12. Inspect the hydraulic brake system for brake fluid leaks.
