Century V6-3.1L VIN J (2005)
Brake Master Cylinder: Service and Repair
Master Cylinder Fluid Level Sensor Replacement
Master Cylinder Fluid Level Sensor Replacement
Removal Procedure
1. Disconnect the electrical connector from brake fluid level sensor.
2. Remove the brake fluid level sensor. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor (1) and
press the sensor through the reservoir to remove.
Installation Procedure
1. Place the brake fluid level sensor (1) into the reservoir, press into place to secure the sensor retaining tabs.
2. Connect the electrical connector to the brake fluid level sensor (1).
