Century V6-3.1L VIN J (2005)
1. Install the front cable into the vehicle as noted in the removal procedure.
2. Install the front park brake cable into the bracket on the park brake pedal assembly.
3. Insert the cable button end into the clevis and install the retaining clip.
4. Reposition the carpeting properly.
5. Install the left side carpet retainers and the lower center pillar trim panel on the left side.
6. Install the left side closeout/insulator panel.
7. Raise and support the vehicle.
8. Install the front park brake cable through the park brake cable guides.
9. Install the front park brake cable into the equalizer.
