Century V6-3.1L VIN J (2005)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 3 park brake pedal assembly retaining nuts.
-
Tighten the nuts to 25 Nm (18 ft. lbs.).
4. Connect the electrical connector to the parking brake switch.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
6. Connect the front cable (1) to the rear cable (3) at the connector clip (2).
7. Adjust the park brake system.
8. Lower the vehicle.
9. Position the carpet in place.
10. Install the left carpet retainer.
11. Install the left side instrument panel insulator.
