Century V6-3.1L VIN J (2005)
Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the cruise control cable from the cruise control module.
IMPORTANT: The cruise control module is mounted to the left strut tower. Service the cruise control module as a complete unit.
2. Disconnect the electrical connector from the cruise control module.
3. Remove the cruise control module retaining nuts from the shock tower.
INSTALLATION PROCEDURE
1. Install the cruise control module on the shock tower mounting studs.
2. Install the cruise control module retaining nuts.
Tighten the cruise control module to shock tower nuts to 2 N.m (18 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
