Century V6-3.1L VIN J (2005)
Heater Core: Service and Repair
HEATER CORE REPLACEMENT
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the coolant. Refer to Draining and Filling Cooling System in Cooling System.
2. Use J 38185 in order to position aside the heater hose inlet and outlet clamp at the heater core.
3. Disconnect the inlet and outlet heater hose from the heater core.
4. Remove the vacuum tank.
5. Remove the floor carpet.
6. Remove the rear floor air outlet duct from the holes in the floor reinforcement.
7. Disconnect the rear floor air outlet duct from the heater core outlet cover.
8. Remove the bolts from the vacuum harness bracket and position bracket aside.
9. Remove the screws from the heater core outlet cover.
10. Remove the heater core outlet cover.
11. Remove the screws from the heater core cover.
12. Remove the heater core cover.
