Century V6-3.1L VIN J (2005)
1. Apply sealant GM P/N 12346286 (Canadian P/N 10953472) or the equivalent to the keyway of the balancer.
2. Install the crankshaft balancer. Use the J 29113.
3. Remove the J 29113.
4. Install the J 37096 to the flywheel to prevent flywheel rotation.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the crankshaft balancer washer and the bolt.
5.1.
Tighten the bolt to 70 Nm (52 ft. lbs.).
5.2.
Use the J 36660-A to rotate the crankshaft balancer bolt an additional 72 degrees.
6. Remove the J 37096 from the flywheel.
7. Install the torque converter covers.
8. Raise the frame to the original position.
9. Install and tighten the frame bolts.
10. Install the right engine splash shield.
11. Install the right front tire and wheel.
12. Lower the vehicle.
13. Install the drive belt.
14. Perform a CKP system variation learn procedure.
