Century V6-3.1L VIN J (2005)
2. Install the water outlet.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water outlet bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Install the ECT sensor.
^
Tighten the sensor to 25 Nm (18 ft. lbs.).
5. Apply 8 - 12 mm (0.08 - 0.11 inch) bead of RTV Sealer, GM P/N 12346286 (Canadian P/N 10953472) or equivalent, on each ridge where front
and rear of the lower intake manifold contact the engine block (1).
6. Install the lower intake manifold gaskets.