Century V6-3.1L VIN J (2005)
11. Install the bolts to the center support bracket of the HVAC module.
Tighten the bolts to 10 N.m (89 lb in).
12. Install the instrument panel wiring harness on to the cross vehicle beam and secure the retaining clips.
13. Install the two screws below the fuse block that hold the main wire harness connector to the cross vehicle beam.
14. Install the BCM bracket and the bolts.
Tighten the bolts to 10 N.m (89 lb in).
15. Install the relay bracket and the bolts.
Tighten the bolts to 10 N.m (89 lb in).
16. Install the right and left side air distribution duct bolts.
Tighten the bolts to 1.5 N.m (13 lb in).
17. Install the support bracket for the steering column.
Tighten the bolts to 50 N.m (37 lb ft).
18. Install the brake pedal.
19. Install the passenger side SIR inflator module.
