Century V6-3.1L VIN J (2005)
4. Install the lower seal (4) to the HVAC case.
5. Install the heater core pipe retainer clamp to the heater core pipes.
6. Install the heater core to the HVAC lower case.
7. Install the screw (2) to the heater core retainer clamp.
Tighten the screw to 1.5 N.m (13 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
8. Install the screw (1) to the heater core support bracket.
Tighten the screw to 1.5 N.m (13 lb in).
9. Install outer seal (5) to the heater core.
