Century V6-3.1L VIN J (2005)
Heater Hose: Service and Repair
Heater Hose - Inlet
HEATER HOSE REPLACEMENT - INLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Use J 38185 in order to reposition the heater hose inlet clamp.
3. Disconnect the heater inlet hose (3) from the inlet pipe.
4. Use J 38185 in order to reposition the heater core inlet hose clamp.
5. Disconnect the heater inlet hose from the heater core.
6. Remove the heater inlet hose.
INSTALLATION PROCEDURE
1. Install the heater inlet hose.
2. Connect the heater inlet hose to the heater core.
3. Use J 38185 in order to reposition the heater core hose inlet clamp.
IMPORTANT: Reposition heater core hose clamps in the indicated location.
