Century V6-3.1L VIN J (2005)
High Pressure Safety Valve HVAC: Service and Repair
Installation
COMPRESSOR PRESSURE RELIEF VALVE INSTALL (V5 - DIRECT MOUNT)
TOOL REQUIRED
J 41790-A Compressor Holding Fixture
1. Clean the pressure relief valve seat area of the rear head.
2. Lubricate the O-ring of the new pressure relief valve with clean 525 viscosity refrigerant oil.
3. Install the new pressure relief valve into the compressor.
Tighten the pressure relief valve to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Remove the compressor from the J 41790-A.