Century V6-3.1L VIN J (2005)
22. Remove the accumulator tube to evaporator core block fitting bolt.
23. Disconnect the accumulator tube from the evaporator.
24. Disconnect the evaporator tube from the evaporator.
25. Remove the O-ring seals and discard.
26. Use J 38185 in order to position aside the heater hose inlet and outlet clamp at the heater core.
27. Disconnect the inlet and outlet heater hose from the heater core.
28. Remove the screws from the heater core outlet cover.
IMPORTANT: Position the heater core outlet cover downward and rearward in order to disconnect the cover from the rear area floor duct assembly.
29. Remove the heater core outlet cover.
30. Remove the evaporator drain elbow.
