Century V6-3.1L VIN J (2005)
31. Remove the mounting nuts for the HVAC module assembly from the cowl.
32. Disconnect the vacuum hoses from the HVAC module assembly.
33. Disconnect the electrical connectors from the HVAC module assembly.
34. Remove the HVAC module assembly.
35. Remove all of the seals (1, 2, 3) from the outer HVAC module assembly.
INSTALLATION PROCEDURE
1. Install new seals (1, 2, 3) to the outer HVAC module assembly.
2. Install the HVAC module assembly to the vehicle.
3. Install the nuts which secure the HVAC module assembly to the dash.
Tighten the nuts to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the evaporator drain elbow.
5. Connect the electrical connectors to the HVAC module assembly.
6. Connect the vacuum hoses to the HVAC module assembly.
