Century V6-3.1L VIN J (2005)
Vacuum Reservoir HVAC: Service and Repair
HVAC Systems - Manual
VACUUM TANK REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel insulator.
2. Disconnect the vacuum hoses from the vacuum tank.
3. Remove the screws that secure the vacuum tank to the HVAC module.
4. Remove the vacuum tank.
INSTALLATION PROCEDURE
1. Install the vacuum tank to the HVAC control module.
2. Install the screws to the vacuum tank.
Tighten the screws to 1.5 N.m (13 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the vacuum hoses to the vacuum tank.
4. Install the instrument panel insulator.
