Century V6-3.1L VIN J (2005)
Parking Light Bulb: Service and Repair
HEADLAMP ASSEMBLY OR HEADLAMP BULB AND/OR CORNERING, SIDEMARKER, PARK, TURN SIGNAL BULB
REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Apply light pressure to the headlamp lens to hold the headlamp in place while removing the retainers.
3. Lift up the headlamp retainers to release, then remove the retainers.
4. Remove the headlamp mounting tabs from the slots in the upper fascia support and the fender reinforcement.
5. Disconnect the electrical connector from the headlamp.
6. Remove the headlamp.
7. Remove the rubber access covers from behind the headlamp bulb/sockets to be replaced.
8. Rotate the headlamp bulb/socket counterclockwise to release.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
9. Remove the headlamp bulb/socket from the headlamp.