Century V6-3.1L VIN J (2005)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Power Steering Cooler Pipe/Hose Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the return hose from the cooler pipe/hose.
3. Remove the cooler pipe/hose retaining bolt from the frame.
4. Remove the cooler pipe/hose from the retaining clips on the frame.
5. Remove the cooler pipe/hose from the clamps on the steering gear.
6. Remove the wiring harness clip from the cooler pipe/hose.
7. Remove the cooler pipe/hose from the steering gear.
8. Remove the cooler pipe/hose from the vehicle.
Installation Procedure
1. Install the cooler pipe/hose to the vehicle.
2. Notice:
Install the cooler pipe/hose to the steering gear.
Tighten the fitting to 27 Nm (20 ft. lbs.).
