Century V6-3.1L VIN J (2005)
3. Notice:
Install the power steering pressure hose to the power steering gear.
Tighten the fitting to 27 Nm (20 ft. lbs.).
4. Install the power steering pressure hose to the retaining bracket on the engine.
5. Lower the vehicle.
6. Install the power steering pressure hose to the power steering pump.
Tighten the fitting to 27 Nm (20 ft. lbs.).
7. Install the coolant reservoir.
8. Fill the power steering system with power steering fluid.
9. Bleed the power steering system.
10. Inspect the power steering system for leaks.
11. Remove the drain pan from under the vehicle.
