Century V6-3.1L VIN J (2005)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement - Inlet (3.1L)
^
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Partially drain the cooling system.
2. Remove the left diagonal brace.
3. Use the J 38185 in order to reposition the hose clamp at the thermostat housing.
4. Disconnect the radiator inlet hose from the thermostat housing.
5. Use the J 38185 in order to reposition the hose clamp at the radiator.
6. Disconnect the radiator inlet hose from the radiator.
7. Remove the radiator inlet hose.
Installation Procedure
1. Position the radiator inlet hose to the vehicle. Align the marks on the hose.
2. Install the radiator inlet hose to the radiator.
3. Use the J 38185 in order to reposition and install the hose clamp at the radiator.
