Century V6-3.1L VIN J (2005)
8. Remove the accelerator cable from the accelerator cable bracket.
9. Remove the accelerator cable from vehicle noting cable routing.
INSTALLATION PROCEDURE
1. Install accelerator cable using the routing noted during removal.
NOTE: Do not route flexible components (hoses, wires, conduits, etc.) within 50 mm (2 in) of moving parts unless flexible components can be
securely fastened. This is necessary in order to prevent possible interference and damage to the component.
2. Install the accelerator cable through the cowl. (4).
3. Install the accelerator cable (5) to the accelerator pedal lever (1).
4. Seat the snap retainer in the accelerator pedal lever.
5. Install the accelerator cable to the throttle body lever.