Century V6-3.1L VIN J (2005)
Relay Box: Service and Repair
Instrument Panel Electrical Center or Junction Block Replacement
INSTRUMENT PANEL ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
TOOLS REQUIRED
J-38125 Terminal Repair Kit
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the access hole cover from the instrument panel (I/P) fuse block.
3. Remove the right I/P insulator.
4. Remove the I/P compartment.
5. Remove the lamp harness retainer (1) from the passenger knee bolster bracket (2).
6. Remove the wiring harness retainer (1) from the passenger knee bolster bracket (2).
7. Disengage the fuse block from the fuse block bracket on the body wiring harness. Lower the fuse block from the I/P.
8. Remove the fuses and the relays from the fuse block.