Century V6-3.1L VIN J (2005)
Knee Diverter: Service and Repair
KNEE BOLSTER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left instrument panel (I/P) insulator.
2. Remove the steering column opening filler.
3. Remove the bolts from the knee bolster at the I/P.
4. Remove the bolts which secure the knee bolster to the steering column support.
5. Remove the knee bolster from the I/P.
INSTALLATION PROCEDURE
1. Install the knee bolster to the instrument panel (I/P).
2. Install the bolts which secure the knee bolster to the steering column support.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the bolts which secure the knee bolster to the I/P.
Tighten the bolts to 2 N.m (18 lb in).
