Century V6-3.1L VIN J (2005)
Power Seat Switch: Removal and Replacement
Seat Switch Replacement - Power
Seat Switch Replacement - Power
Removal Procedure
1. Remove the front seat cushion outer trim panel. Refer toTrim Panel Replacement - Front Seat (See: Body and Frame/Seats/Service and
Repair/Trim Panel Replacement - Front Seat) .
2. Remove the screws from the seat switch to the trim panel.
3. Disconnect the electrical connector from the power front seat switch.
4. Remove the power front seat switch from the vehicle.
Installation Procedure
1. Connect the electrical connector to the power front seat switch.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the screws to the seat switch to the trim panel.
Tighten the screws to 3 Nm (27 lb in).
3. Install the front seat cushion outer trim panel. Refer toTrim Panel Replacement - Front Seat (See: Body and Frame/Seats/Service and