Century V6-3.1L VIN J (2005)
3. Install the positive battery cable (9) and the solenoid BAT terminal nut (8). Tighten finger tight to the starter motor.
4. Install the starter solenoid wire (6) and the starter solenoid S terminal nut (7). Tighten finger tight to the starter motor.
1. Tighten the solenoid BAT terminal nut (8) to 10 N.m (89 lb in).
2. Tighten the starter solenoid S terminal nut (7) to 3 N.m (27 lb in).
5. Install the torque converter covers.
6. Install the front lower air deflector panel.
7. Lower the vehicle.
8. Connect the negative battery cable.
