Century V6-3.1L VIN J (2005)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the bearing/hub assembly.
3. Remove the front lower control arm ball stud.
4. Remove the outer tie rod end from the steering knuckle.
5. Scribe the strut to the knuckle.
6. Remove the bolts and nuts attaching the strut to the knuckle.
7. Remove the knuckle from the vehicle.
Installation Procedure
1. Install the knuckle to the vehicle.