buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 6940 > < SIR Disabling and Enabling Zones|Page 6938
Page 2
background image

4. Install the LH insulator panel.

5. Install the SIR fuse.
6. Install the I/P fuse block cover.
7. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
8. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System

Check - Vehicle in Vehicle DTC Information.

SIR Disabling and Enabling Zones|Page 6940 > < SIR Disabling and Enabling Zones|Page 6938