Century V6-3.1L VIN J (2005)
Control Arm Bushing: Service and Repair
Vertical
Lower Control Arm Bushings Replacement (Vertical)
^
Tools Required
-
J 21474-01 Control Arm Bushing Set
-
J 21474-271/2 Inch Puller Bolt Thrust Bearing
-
J 21474-2 Bushing Installer Remover
-
J 21474-4 Nut
-
J 21474-13 Control Arm Bushing Installer
-
J 23444-A High Pressure Lubricant
-
J 34126 Driven Sprocket Support Bearing Installer
-
J 35379 Front Knuckle Support
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
3. Mark the lower control arm along the flat edge of the bushing flange.