Century V6-3.1L VIN J (2005)
Rear Knuckle: Service and Repair
Knuckle Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Scribe the strut to the knuckle.
4. Remove the bearing/hub assembly.
5. Remove the rear wheel spindle rods from the knuckle.
6. Remove the trailing arm (2) from the knuckle (3).
7. Remove the rear strut to knuckle bolts (2) and the nuts (1).
