Century V6-3.1L VIN J (2005)
1. Install the coil spring and upper strut mount to the J45400.
2. Turn the spring compressor forcing screw (1) until the coil spring is compressed.
3. Install the strut to the coil spring and upper strut mount.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the strut retaining nut. Using the J42991 and a 45 TORX(R) socket, install the strut mount nut.
Tighten the strut mount nut to 85 Nm (63 ft. lbs.).
5. Remove the strut from the J45400.
6. Install the strut to the vehicle.