Century V6-3.1L VIN J (2005)
15. Separate the left ball joint (3) from the steering knuckle.
16. Position the drain pan under the transaxle.
17. Remove the left drive shaft (1) from the transaxle.
18. Secure the drive axle to the steering knuckle/strut.
19. Support the left side of the frame with a jackstand.
20. Loosen the engine mount lower nuts.
21. Loosen the right center frame bolt only. Do NOT loosen the right front or right rear frame bolts.
22. Remove the left frame bolts.
23. Adjust the jackstand to lower the left side of the frame until the frame hangs free. Remove the jack stand.
24. Lower vehicle to access engine support fixture.
25. Lower the engine/transmission assembly with the engine support fixture to gain access to the remaining side cover bolts.
26. Raise the vehicle to access the side cover bolts.
