Century V6-3.1L VIN J (2005)
Transmission Pressure Test Port: Testing and Inspection
Oil Pressure Test Plug Replacement
Removal Procedure
1. Remove the air cleaner intake duct.
2. Remove the line pressure pipe plug (38).
Installation Procedure
1. Apply GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the line pressure pipe plug.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil pressure test hole plug (38).
Tighten the plug to 12 Nm (106 inch lbs.).
3. Install the air cleaner intake duct.