Century V6-3.1L VIN J (2005)
Windshield Washer Reservoir: Service and Repair
Washer Solvent Container Replacement
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Drain the washer solvent from the washer solvent container.
2. Remove the washer solvent container filler neck.
3. Remove the right headlamp assembly.
4. Remove the washer solvent container screws.
5. Remove the front fender liner.
6. Disconnect the washer pump hose.
7. Disconnect the washer pump electrical connector.
8. Disconnect the washer solvent level sensor electrical connector.
9. Remove the washer solvent container bracket screw.
10. Remove the washer solvent container from the right frame rail.
INSTALLATION PROCEDURE
1. Position the washer solvent container to the right frame rail.
2. Install the washer solvent container bracket screw.
NOTE: Refer to Fastener Notice in Service Precautions.
