Century V6-3100 3.1L VIN M SFI (1998)
4.
Place the carpet (1) over the retainer (2) and mark the location of the retainer on the carpet.
5.
Pull back the carpet and retainer from the clip.
Important:
If screws or rivets are used, file the excess screw or rivet material smooth on the underside of the retainer to avoid an itching or squeaking sound
from between the fastener and the floor pan when reinstalled.
6.
Using an upholstery type stapler, attach the retainer (2) to the carpet (1) using three 12 mm (1/2 in) long galvanized staples (3). If a stapler is not
available, short trim screws or rivets may be substituted.
7.
Place the slot in the retainer over the clip.
8.
Reinstall the door opening weatherstrip.
9.
Reinstall the sill plate molding.
10.
Repeat the procedure on the opposite side of the vehicle.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
