Century V6-3100 3.1L VIN M SFI (1998)
4. Starting at the door bottom, use the J 38778 to release the door trim panel retainers.
5. Lift the trim panel up to release the top edge and remove it from the door.
INSTALLATION PROCEDURE
IMPORTANT: Before installing the door trim panel to the door, discard the old trim panel retainers. Use new trim panel retainers in order to properly
secure the trim panel to the door.
1. Install the new trim panel retainers to the trim panel.
2. Connect the electrical connectors as needed.
3. Position the top of the trim panel at the window opening and press down.
4. Align the fasteners into the holes in the door metal.
5. Press on the trim panel in order to secure the fasteners into the door.
NOTE: Refer to Fastener Notice in Cautions and Notices.
