Century V6-3100 3.1L VIN M SFI (1998)
Traction Control Switch: Service and Repair
REMOVAL PROCEDURE
1. Remove the front floor console trim plate.
2. Depress the retainers on each side of the traction control switch.
3. Lift the traction control switch from the front of the floor console trim plate.
4. Disconnect the electrical connector from the traction control switch.
INSTALLATION PROCEDURE
1. Connect the electrical connectors to the traction control switch.
2. Align the traction control switch to the front floor console trim plate.
3. Press the traction control switch into the console trim plate until the retainers fully seated.
4. Install the front floor console trim plate.
