Century V6-3100 3.1L VIN M SFI (1998)
Brake Caliper: Service and Repair
Brake Caliper Overhaul (Front)
DISASSEMBLY PROCEDURE
1. Remove the caliper. Refer to Brake Caliper Replacement (Front).
CAUTION: Do not place fingers in front of the caliper piston(s) in an attempt to catch or protect it when applying compressed air. The
piston(s) can fly out with force and could result in serious bodily injury.
NOTICE: Use clean cloths to pad interior of caliper housing during piston removal. Use just enough air to ease the pistons out of the bores. If the
pistons are blown out, even with the padding provided, it may be damaged.
2. Remove the piston. Blow compressed air into the caliper inlet hole. The piston will come out through the piston boot.
3. Inspect the piston for the following conditions:
^
Scoring
^
Nicks
^
Corrosion
^
Worn or damaged chrome plating
Replace the piston if any of the above conditions are found.
4. Remove the caliper boot. Do not scratch the housing bore.
NOTICE: Do not use a metal tool for seal removal. Damage to the caliper bore or the seal grooves can result.
