Century V6-3100 3.1L VIN M SFI (1998)
Electronic Brake Control Module: Service and Repair
EBTCM Replacement
REMOVAL PROCEDURE
1. Remove the IP sound insulator panel.
2. Use pressure tabs in order to release the EBCM/EBTCM (1) from the EBCM/EBTCM bracket (2).
3. Remove the EBCM/EBTCM electrical connectors (4).
INSTALLATION PROCEDURE
1. Install the EBCM/EBTCM electrical connectors (4).
2. Slide the EBCM/EBTCM (1) into the EBCM/EBTCM bracket (2) until pressure tabs secure the EBCM/EBTCM.
3. Install the P/P sound insulator panel.
