Century V6-3100 3.1L VIN M SFI (1998)
Traction Control Module: Service and Repair
Brake Modulator Replacement
REMOVAL PROCEDURE
1. Remove the gear cover (3). Refer to Modulator Gear Cover Replacement.
2. Remove the brake motor pack (ABS) (1). Refer to ABS Motor Pack Replacement.
3. Remove two ABS brake modulator to master cylinder banjo bolts (2).
4. Separate the brake modulator (6) from the master cylinder (8).
5. Remove two transfer tubes (7) with O-rings from the master cylinder (8) or the ABS brake modulator (6).
6. Remove banjo bolt O-rings from the master cylinder (8) and the ABS brake modulator (6).
INSTALLATION PROCEDURE
