Century V6-3100 3.1L VIN M SFI (1998)
Installation Of Heater Core Seals (Side Seals)
Installation Of Heater Core Seals (Center Seal)
Installation Of Heater Core Seals (Outer On Heater Core)
Remove or Disconnect
1. Air cleaner and duct assembly on (3100 only).
2. Fuel injector sight shield (3800 only). Refer to Engine Cover Replacement See: Engine/Service and Repair.
3. Drain coolant.
4. Both heater hoses at heater core.
5. Lower center console (if equipped).
6. Both lower instrument panel lower compartment.
7. Heater outlet case screws.
8. Heater core cover.
9. Heater core mounting clip screw.
10. Heater core line clamp screw.
11. Heater core.
12. All foam seals to heater core case.
13. Heater core line clamp.
Install or Connect
