Century V6-3100 3.1L VIN M SFI (1998)
Drive Belt Tensioner: Service and Repair
REMOVAL PROCEDURE
1. Remove the coolant recovery reservoir.
2. Remove the drive belt.
3. Remove the drive belt tensioner bolt.
4. Remove the drive belt tensioner.
INSTALLATION PROCEDURE
1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolt.
^
Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the drive belt. Refer to Drive Belt Replacement.
4. Install the coolant recovery reservoir.
