Century V6-3100 3.1L VIN M SFI (1998)
Engine Mount: Service and Repair
Engine Mount
REMOVAL PROCEDURE
^
Tools Required
-
J 28467-B Engine Support Fixture
-
J 28467-90A Engine Support Adapters
-
J 36462-A Engine Support Adapter Leg
1. Disconnect the battery ground (negative) cable.
2. Remove the throttle body air inlet duct.
3. Remove the engine mount struts.
4. Raise and suitably support the vehicle.
5. Remove the three-way catalytic converter pipe from the right (rear) exhaust manifold.
6. Remove the right front wheel and tire.
7. Remove the right engine splash shield.
8. Remove the engine mount lower nuts.
9. Lower the vehicle.
10. Raise the engine, using the J 28467-B.
11. Raise and suitably support the vehicle. Refer to Vehicle Lift Points.
12. Remove the engine mount bracket-to-oil pan bolts.
13. Remove the engine mount and the engine mount bracket.
