Century V6-3100 3.1L VIN M SFI (1998)
^
Tighten the engine mount bracket bolts to 58 Nm (43 ft. lbs.).
5. Lower the vehicle.
6. Lower the engine.
7. Raise and suitably support the vehicle.
8. Install the engine mount lower nuts.
^
Tighten the engine mount lower nuts to 43 Nm (32 ft. lbs.).
9. Install the right engine splash shield.
10. Install the right front wheel and tire.
11. Connect the three-way catalytic converter pipe to the right (rear) exhaust manifold.
12. Lower the vehicle.
13. Remove the J 28467-B
14. Install the engine mount struts.
15. Install the throttle body air inlet duct.
16. Connect the battery ground (negative) cable.
