Century V6-3100 3.1L VIN M SFI (1998)
1. Position the right engine mount strut bracket over the pin locator.
2. Install the vertical bolt through the right engine mount strut bracket to the cylinder head.
^
Tighten the engine mount strut bracket bolt to 50 Nm (37 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the air conditioning compressor.
4. Install the air conditioning compressor mounting bolts.
^
Tighten the air conditioning compressor mounting bolts to 50 Nm (37 ft. lbs.).
5. Install the right engine mount strut to the right engine mount strut bracket.
6. Connect the battery ground (negative) cable.
